A residential gate opener should not be confused with a gate operator. Gate openers are designed for residential gates while the gate operators are designed for heavy duty commercial gates. Once it is said remote opener it will not necessarily mean remote control device but it refers to the motor parts that utilized to open gates. This could be activated by the use of a remote controller or a timer. A gate remote opener will save you from getting out of your car every time you want to drive in and out of your home. Another is that you will get out of the house and open and close the gate manually. If the weather is not good you will not worry that you will get wet but you will be dry until you reach your destination. Some residential gate openers are worm-driven operators which will operate whether it is a sliding gate opener or swing gate opener. So it is obvious that the swing arm operators will be compatible and work only in swing gate. A worm driven operator is a fence that is driven by screw and piston that will help the function of a ram arm. This kind of operator is less difficult than the swing arm gate because it will not need chains, valves and other mechanisms. The swing arm operators reach up to the middle of the gate or and the end of the gate if it is single swing gate. It is made possible with a hydraulic piston because this will manage any type of gate materials.
One set Residential Gate Opener including: Gate motor, Control board, Base, 2 remote controls, Release key, Mounting accessory.
1 High sensitivity obstruction detection with automatic reverse. And the reverse force is adjustable.
2. With built-in thermal protector, for protection when the motor heat up to rated temperature
3. Keypad / single button interface
4. Photo beam safety beam interface
5. Auto-close function is adjustable, and the time delay closed is adjustable
6. Electronic Soft Start & Stop
High quality Cast aluminum alloy base |
Powerful, reliable, smooth operation with |
|
|
Manual key release design for |
MCU is supplied to control the gate operator |
Double-sides welding spot on the control board, which makes it more durable in case on side welding spot break down.
Model | SD370 | SD550 | SD750 | SD950 | SD1200 |
Power supply | 110V/220~230V AC | ||||
Rated power | 370W | 550W | 750W | 950W | 1200W |
Torque | 18N.M | 28N.M | 38N.M | ||
Max. Gate weight | 600-800kg | 1200kg | 1600kg | 1800kg | 2000kg |
Travel speed | 14m/min | 12m/min | 10m/min | ||
Operating ambient Temp. | -20°~+55° | ||||
Weather-resistance Rate | IP44 |
1. Photo cell It can detect the tiny obstruction during gate closing or opening and make the gate open automatically. Avoiding people and gate opener from hurting. The valid detecting range of the photo cell is 10 meters.
2. Alarm lamp When the person force entering the house, the alarm lamp will light and sound.
3. Steel rack and nylon rack
4. Access keypad Connecting with access keypad, you can set the code or using the card to control the gate access.
An underground loop opener can also be utilizes to both sliding gate and swing gates. This type of gate opener is quite costly but it is the decent and neat looking gates. The mechanisms are built underground below the base of the gates and you cannot view any chains or arms above the ground. The clean look of the gate was due to the fact it is installed near the residence electrical. If this is not followed you can use DC modules or photovoltaic or solar operated.
Before you decide on what residential gate opener you will install in your gate, you should look for the stability, simplicity, resistance and durability of the materials that you will use. It must also be cost-effective and it will be suited according to your needs. It must be noise free so that it will create disturbance that you might think something is not right. It should be easily controlled and you need not to memorize how you will operate it. You might forget and you cannot enter or lock in your own home.