Olide Remote Control for Automatic Door System
Olide Remote Control for Automatic Door System
Suitable for automatic door unit eqiupment
- Chip Upgrade, Convenient Code
Top grade stainless steel case, sliding block keyboard protection. Plug and play, convenient and comfortable;
Remote Key Function
A: Normally closed
B: Normally open
C: Sime-open
D: Automatic
Code Mode:
- Empty/long press the code button, know not to hear the buzzer sound, release the button.
- Code/press the code button and the buzzer calls. By pressing any button on the remote control, the buzzer stops calling, indicating that the code is successful. When you use the remote control, the buzzer calls for 2 seconds.
- Note/use the remote control, buzzer "doodle" two times, indicating that the remote control and controller is not successful, please repeat item 2.
Plug and play, convenient and comfortable.
Cooperation of automatic door
Microcomputer Controller
Olide Floor Guider ( A Pack of Ten )
Olide Floor Guider (A Pack of Ten)
The floor guider is specially designed for framed automatic doors. The ground wheel is exposed and fastened to the overlap between the moving door and the fixed door. This ground wheel can hold the 4-6cm door plate.
It is made of galvanized cast iron, and the wheel uses a bearing nylon wheel. Good quality, stable use, strong applicability.
- Pendulum trim cap
Cover the body slide and pulley of the pendulum stop to protect the internal structure;
- Cover with rubber and wool
Pressure relief friction, door plate protection;
- Pendulum body
Made of thickened steel plate, galvanized surface;
- Shaft and wheel
Made of nylon wheel and bearing, smooth and noiseless;
Function: Fixed door mounted on the ground.
Make the door move inside the pendulum without shaking, iron doors, wooden doors, framed glass doors, etc., to ease the friction of door panels.
Floor Guider Parameters
Name: floor guider with silica gel cover
Size: 94*40*31mm
Applicable door frame: >=57mm, <=32mm
Shell material: galvanized cast iron
Internal material: nylon wheel alloy shaft
Rubber cover reduce the friction of the door plate, is more stable and has a long life
Product Size and Installation
Installation instructions:
Easy to adjust, only need to unscrew the cover screw, unscrew the wheel on the two screw pull out the wheel, tighten the screws. Tighten the cover screw when the cover plate is changed, that is, the installation is successful.
Olide Medical Manual Flat Swing Door
Olide Medical Manual Flat Swing Door
Medical manual flat swing door is a special door for medical and hospital operating rooms to ensure clean environment. This flat door is highly durable and the door body is made from SUS304 stainless steel with aluminum plate coating. The door hidden seals are concealed under the door body meeting airtight requirements. This door is application to wash room, ward, and consulting room in the hospital.
This medical manual flat swing door is a perfect fit for door installations self closing requirements and limited width requirement. Swing door is primarily used with bi-fold acting as breakaway. It is a door closer perfect for handling traffic. Flat swing doors can open conveniently in any direction. It offers a wide opening nearly the doorways full width. It is very easy to install and simple to use enhancing working conditions.
Manual Doors Advantages
Doors have been around for centuries and they not only help to improve a property’s aesthetics but also provide security. Whilst, doors have gradually evolved as years go by to the point where automation has become effortless. However, there are still situations where manual operation is what is required.
For medical facilities looking for economical solutions, manual flat swing door will serve you well. Without the need for sensors for operation and no need for electricity top power the door, there very little that can go wrong. Medical manual doors are reliable and secure option as long as they are fitted with the right mechanism. The company can create medical manual door that will suit your business premises.
The project will be carried out by professional door contractors that can produce manual swing doors at the highest quality possible. Medical manual flat swing door that will be produced will linked to your business’s current existing access control system to ensure continuity of your business operation.
Features
- Stainless steel frame
- Stainless steel door edge
- Aluminum plate coated door body
- SUS305 stainless steel
- Seals concealed under the door body
- Meets air tight requirement
Medical manual flat swing door provided by the company is what exactly needed for medical facilities that require high levels of cleanliness and sanitation. The air tightness feature of the door will not allow any allergen spores in the air to enter inside the operating room ensuring cleanliness.
The company have considerable experience in repairing, installing, and maintaining all kinds of manual door systems. Aside medical manual flat swing door, the company’s products include sliding doors, panel doors, revolving doors, single and double swing doors, folding doors, overhead opening doors, and garage style doors.
