Integrated Pedal Inductive Switch,Motion Switch For Hospital/Laboratories And Cleaning Rooms
Integrated Pedal Inductive Switch
Product application
It is widely used for sensing control of autodoors at entrance and exit of hospital operation rooms, laboratories and cleaning rooms, foot operation is used to eliminate the contact pollution of hands.
General characteristics
►The controller is integrated with the pedal box, so that the installation and wiring is simpler.
►It adopts microcomputer control and international fine brushed stainless steel appearance design.
►It adopts front concealed mounting fixing screws and in-built exquisite beam sensor, characterized by easy installation, stable performance and strong anti-interference ability.
►Active infrared sensor using microprocessor modulation and demodulation.
►Detection mode: when the foot appears and the beam is blocking, then a door opening signal is generated.
Technical parameters
|
Technical measures: |
active infrared sensor using microprocessor modulation and demodulation |
Recommended mounting height: |
the center is 0.3m above the ground |
|
Detection mode: |
when the foot appears and the beam is blocking, then a door opening signal is generated |
Response time: |
relay output ≤45ms |
|
Power output: |
AC/DC 12-30V |
Whole machine power consumption: |
82mA |
|
Monitoring signal: |
4.5S MA |
Signal indication: |
when the sensing control is valid, the red light is always on and the green indicator flashes when the beam is blocking |
|
Ambient temperature: |
-20°C- +55°C |
Anti-Interference capacity: |
solar beam 81000LUX |
|
36000LUX |
Electronic microwave: |
conform to 89/336CEE standard |
|
|
Outline size: |
186mmX175mmX53mm |
Signal output: |
optional between normally open or closed of relay |
