1. If the rail of automatic doors is installed on the welding iron framework, the whole framework of automatic doors should use square iron pipe with 3cm wall thickness, or use other materials that firm and strong.
2. Keep the whole framework horizontal vertical, firm and solid during installation. The installation rail should keep smooth and no burr and the aluminum alloy rail should also keep horizontal vertical and firm.
3. If installed on bearing wall, the aluminum alloy rail should also keep horizontal vertical and firm.
4. Check dampers are installed after adjusting the door framework, and they must keep firm.
5. Sopporting screws and leather cushion must be applied if you use our automatic frameless doors.
6. Make sure that the probe head stay steady and no jiggling.
1. Please walk though the automatic door in order, and do not pass the door by force when it is to close. Walk through the door when there is space for one person.
2. Do not jam and bump against the automatic door, or damage the devices and framework by external force.
3. Children under 1.2m in height, the elderly and the disabled are only allowed to go through the automatic door with the assistance of a guardian. Or face the consequences.
4. Please do not stay in the automatic door for extended period or put any articles in the automatic door.
5. Please do not stay in induction area and the automatic door for extended period when the door is in the state of automatic induction.
6. When power is off, you can push the automatic door open. And when the door is in malfunction or in emergency, please cut the power off first, and then push the door open.
7. Please labeling a warning sign on the fixed and moving automatic glass doors, to avoid people bumping against the door.
