Safety Beam Sensor For Automatic Door
Beams sensor is widely used as the auxiliary function of (human bodies or objects) presence detect for autodoors and can accurately and reliably detect. Beams sensor will provide the opening door signal if it detects the presence of human bodies or objects, so as to avoid the potential safety hazard event of human bodies or objects clamping by autodoors.
Complete with: beam sensor surface mounting frame (CNB-218G), and support frame specifically for CNB-218E, 218D, 218H beams sensor, convenient for beams sensor fixing on the edge of various types of door frame and decorative column.
General characteristics
►The plug socket of corresponding color is used, so that the wiring is simple, convenient and accurate.
►Optional between single beam and dual beam, flexible selection of distance.
►It consists of pairs of transmitting and receiving beam sensors and main controller, with long transmitting distance and flexible and convenient beam senor wiring.
►It adopts unique high precision calculation model, with sunlight filter factor, so the anti-interference ability of the system is greatly improved.
►It is provided with receiver sensor short circuit fault alarm function.
Technical parameters
AC/DC 12-30V(-/+10%) |
|||
Contact output state: |
optional between normally open and normally closed |
||
Output capacity: |
contact 1A/24VDC |
Beam sensor surface mounting frame (CNB-218G): |
28(L)x30(W)x18.5(H)mm |
10m |
Size