Operating rooms are responsible for performing surgery and rescuing critically ill patients, the working quality of which will directly affect postoperative recovery and medical result. Along with the improvement of medical conditions, the application of clean operating rooms has become more popular, and the equipment of clean operating rooms has become one of the important indicators of hospital construction. It plays a significant role in reducing exogenous surgical infection. Therefore, automatic medical doors that can meet higher and more special requirements are needed at the entrance of clean areas.
1.It adopts various forms of door edge wrapping, is equipped with high-strength durable seal strips, and satisfies with purification requirements.
2. The operator track rail of on-wall type is directly mounted onto the wall, easy and fast for installation.
3. It adopts high-quality hardware, and is beautify, delicate, practical and reliable.
4. Unique design of handles to reduce manual opening force when power off.
5. Operating quietly and fast, the sound insulation effect is good.
6. Rubber lining sealing technology combined with groove on the guide rail enables the door completely sealed when the door closed.
Rubber lining sealing technology combined with groove |
Unique design of handles to reduce |
Choose color on the door body surface | Xray door lead lined inside 1.5mm |
Door sliding modes | Single-opening | Double-opening |
Dooe leaf weight | ≤1*195 kg | ≤2*185 kg |
Door leaf width | 600-1200mm | 500-1150mm |
Opening speed | 150-500mm/s(Adjustable) | 150-450mm/s(Adjustable) |
Closing speed | 100-450mm/s(Adjustable) | 150-430mm/s(Adjustable) |
Motor | 24V 100W brushless DC motor | |
Opening time | 0-9s(Adjustable) | |
Automatic function | Automatically reverse upon obstruction | |
Voltage | AC220V 50Hz-60Hz | |
Operating ambient Temp. | -20°C~60°C |
video on youtube:
High dynamic acceleration, low moment of inertia extremely |
1. Indepent power supply makes the door more efficiency and |
Foot sensor makes doctors and nurses more covenient enter |
Olide air tight door guide rail use unique technology, which makes door completely sealed when door closed. |
|
Olide airtight door sliding slots use convex structure, which makes altering trajectory more flexible, also can be dust proof. |
|
Olide tensioning wheel material is galvanized steel, reliable and long-lasting |
tensioning wheel from other supplier material is plastic, fragile and lower use life. |
The following are the requirements of automatic medical door s if operating rooms:
Firstly, the requirement for tightness.
1. The outer surface of door body is made of stainless steel, electrolytic steel plate and color steel plate. Among them stainless steel is of best quality, as well as highest cost of manufacture. The intermediate layer of door body is made by foaming technology or honeycomb structure. If radiation protection is required, lead plate with certain thickness should be used in the intermediate layer. Besides, the wall commissure should be inlaid with sealing strips.
2. The reducer of electric motor should be specially manufactured. Thus it can minimize the noise to meet the demand of clean rooms.
3. The electric control part must conform to national standards of EMC to avoid disturbance to medical devices.
4. The voltage range of electric control part is wide.
Secondly, the requirement for functions.
1. An interface is needed to start air shower device.
2. An interface is needed to connect standby power.
3. Anti-jamming is enhanced to increase security, and the door body must have the function of deterrence and rebound.
4. The medical door must have functions of prolonged closing time and double induction.
5. The medical door must set up non-contact proximity sensor, for example, con-contact hand sensor or foot sensor.