Factory can be a very busy place because it is the place where products are being manufactured and produced. People working in a factory usually carry heavy carts full of products and other things that they need inside the factory. Sometimes they even use a machine and other equipments just to hold and carry many things inside and out the factory. To open and close the gate of a factory can bring hassle and may consume too much time and effort of the busy people working in the place. In a fast phase environment like in factory an automatic system can be a very useful for all the workers of the factory. Automatic factory gate opener can really help workers to save time and effort in opening and closing the gate of the factory.
One set Automatic Factory Gate Opener including: Gate motor, Control board, Base, 2 remote controls, Release key, Mounting accessory.
1 High sensitivity obstruction detection with automatic reverse. And the reverse force is adjustable.
2. With built-in thermal protector, for protection when the motor heat up to rated temperature
3. Keypad / single button interface
4. Photo beam safety beam interface
5. Auto-close function is adjustable, and the time delay closed is adjustable
6. Electronic Soft Start & Stop
High quality Cast aluminum alloy base |
Powerful, reliable, smooth operation with |
|
|
Manual key release design for |
MCU is supplied to control the gate operator |
Double-sides welding spot on the control board, which makes it more durable in case on side welding spot break down.
Model | SD370 | SD550 | SD750 | SD950 | SD1200 |
Power supply | 110V/220~230V AC | ||||
Rated power | 370W | 550W | 750W | 950W | 1200W |
Torque | 18N.M | 28N.M | 38N.M | ||
Max. Gate weight | 600-800kg | 1200kg | 1600kg | 1800kg | 2000kg |
Travel speed | 14m/min | 12m/min | 10m/min | ||
Operating ambient Temp. | -20°~+55° | ||||
Weather-resistance Rate | IP44 |
1. Photo cell It can detect the tiny obstruction during gate closing or opening and make the gate open automatically. Avoiding people and gate opener from hurting. The valid detecting range of the photo cell is 10 meters.
2. Alarm lamp When the person force entering the house, the alarm lamp will light and sound.
3. Steel rack and nylon rack
4. Access keypad Connecting with access keypad, you can set the code or using the card to control the gate access.
Through modernization also brought innovation and improvement in the equipment and system of the factory. It is good to apply some innovations in the system of the factory because it may lead to the improvement in the quality of work of the factory workers and to the products of the factory as well. Automatic factory gate opener is a manifestation that the factory is improving that is why the management of the factory is applying innovations that can help workers to feel comfortable and work efficiently. Automatic factory gate openers are usually battery and electronic operated. It also use low voltage systems which are affordable and safe. Some automatic factory gate opener can be installed by two or more people but you can also ask assistance from the staff of your automatic gate opener provider.
To have an automatic factory gate opener, you must prepare the gate for installation. To be able to ensure good opening and closing the gate need to move all the way through the arc without touching the ground. Wheels must be attached to the gate. Factory gates with more than 250lbs must have ball bearing and grease fittings. The power source of the automatic factory gate openers are powered by 12 volt DC power which can be very suitable because you can also use a 12 volt battery to your unit. The manufacturer of your automatic gate opener will supply the battery maintainer. You must make sure that you use maintainer and not a charger. There are also several options on how automatic factory gate openers will be controlled. You can choose if you will use a simple remote control to open and close the gate and you can also use some options on how you will operate the controllers of your automatic factory gate openers.
Through modernization also brought innovation and improvement in the equipment and system of the factory. It is good to apply some innovations in the system of the factory because it may lead to the improvement in the quality of work of the factory workers and to the products of the factory as well. Automatic factory gate opener is a manifestation that the factory is improving that is why the management of the factory is applying innovations that can help workers to feel comfortable and work efficiently. Automatic factory gate openers are usually battery and electronic operated. It also use low voltage systems which are affordable and safe. Some automatic factory gate opener can be installed by two or more people but you can also ask assistance from the staff of your automatic gate opener provider.
To have an automatic factory gate opener, you must prepare the gate for installation. To be able to ensure good opening and closing the gate need to move all the way through the arc without touching the ground. Wheels must be attached to the gate. Factory gates with more than 250lbs must have ball bearing and grease fittings. The power source of the automatic factory gate openers are powered by 12 volt DC power which can be very suitable because you can also use a 12 volt battery to your unit. The manufacturer of your automatic gate opener will supply the battery maintainer. You must make sure that you use maintainer and not a charger. There are also several options on how automatic factory gate openers will be controlled. You can choose if you will use a simple remote control to open and close the gate and you can also use some options on how you will operate the controllers of your automatic factory gate openers.